WHERE ARE YOU SHOPPING FROM?

uk-flag

👉 Check out our Easter Sale! Up to 25% OFF

Global Shipping

We ship all over the world

Email Support

Dedicated email support

Returns Policy

30-Day returns policy

Affiliate Scheme

Make money selling for us

VAT Exemption

For personal use for those eligible

Dirty Electricity Filter for European Sockets

These Dirty Electricity Filters for the EU help you reduce EMF pollution in the form of dirty electricity present on electrical wiring in your home and other buildings where you have influence.

EMF filters are an easy and effective approach to dirty electricity mitigation, which allows us to use modern conveniences more safely. You just need to plug the EMF filters directly into your wall sockets, and the dirty electricity is minimised and your electric loss reduced.

For more information about dirty electricity, see our article What is Dirty Electricity? and our video Dirty Electricity Explained.

And for more information on how to use dirty electricity filters, how many filters you need, and other FAQs, please see below.

Out of stock

£35.83 VAT Excluded

Out of stock

SKU EMFDEONEEU Category Tag

Description

By installing dirty electricity filters in your home, you can significantly reduce the amount of dirty electricity, thereby reducing your exposure to EMF radiation. An EMF filter could bring you health and also, potentially, as in some cases, lower your electricity bill.

Easy install

Just plug the EMF filter into a mains socket, and it will get to work, reducing the dirty electricity in your home. (For more information, please click the tab How many filters do I need?)

What is Dirty Electricity?

Dirty electricity (DE) is an anomaly caused by high-voltage surges travelling along standard wiring that only has a capacity of 50/60 Hz. Also known as line noise or electrical noise, it is an increasing source of pollution in the environment today.

For a more in-depth discussion, please read this article and watch this video explanation from Glynn (EMF Protection founder).

Technical details

The dirty electricity filters contain electrical capacitors that can shorten the high frequency on your electrical circuit.

The unit contains a 10 microfarad AC mains-voltage-rated capacitor, discharging resistor, and fuse. Unlike some DE filters on the market, ours contain an electric-field screen inside the case, which is connected to the Earth pin. Some filters on the market are not even internally fused. Our DE2 units are fully approved by European safety standards.

UK plug available

Find the UK version here.

Additional information

Weight 0.2 kg
Dimensions 20 × 12 × 6 cm

How many filters do I need?

Please see the info below and/or our video called Dirty Electricity Filters: How Many Do I Need And Where Do I Put Them?

The answer to this question is that every home is different; different rooms within the home require different numbers of dirty electricity filters.

For example, in Glynn and Esther’s home, they switch all the power off at night (if that sounds mad, try it – you might be amazed at how good you feel in the morning). Because they do this, they do not need any dirty electricity filters in the bedrooms, but they have four offices in their home, and each office needs a minimum of four filters. They have no filters in the bathrooms, but another four in the lounge, two in the dining room, and four in the kitchen. You get the idea.

It is really quite simple.

To calculate the number of filters you need, work on roughly two filters per frequently-used room plus a couple extra for offices and sitting rooms, excluding bathrooms. (You can always order more if you need to or return them if you have more than you require. See our Returns Policy.)

You will also need a dirty electricity line or noise monitor, which you can buy or rent from us.

Once the monitor and filters arrive, read the instructions, plug the monitor in and then the filters until the monitor displays a figure that corresponds with the recommended healthy levels in the instructions.

We offer three multi-buy starter packs:

Other FAQ

Can I return my purchase?

Yes, we offer ‘no-quibble’ returns within 30 days of purchase. Please see our Returns Policy.

Do you offer support?

Yes, we provide free technical support and advice from experienced EMF shielding experts.

Where can I learn more about dirty electricity and its affects on health?

We have a great blog post about DE, which you can find here.

What is dirty electricity?

Dirty electricity (DE), also known as dirty mains, dirty power or electrical pollution, is a term that describes the problem of electromagnetic noise being on the mains wiring of a house when it isn’t supposed to be. Basically, your electrical supply is supposed to have just a 50 Hz sine wave on it, but this is rarely the case. There are almost always significant second and third harmonics (100 Hz and 150 Hz in Europe, 120 Hz and 180 Hz in the USA), but these are not thought to be any more harmful than the pure sine wave.

What are the effects of dirty electricity on my appliances?

DE typically interferes with the optimum functioning of electronic appliances, creating a phenomenon known as power-line electromagnetic interference (EMI). Today, as electrical appliances draw power from the main building wiring, it not only gets the standard electricity as initial input but also receives erratic surges and spikes of energy. When this happens, many electric appliances malfunction because they are not equipped to handle this DE.

Where can I learn more about dirty electricity?

We have a video explanation that you can see HERE, and great blog post that you can find HERE.

DE explained (video)